photoexlightingschool.com®
For warranty registration and information, please visit www.photoflex.com®
QuikDisc
™
12 inch White Balancing Tool Instruction Manual • Item# DL-1712QD
The QuikDisc™ is the perfect portable white balancing tool used to take an ac-
curate exposure meter reading using your cameras own built-in metering system.
You should have a QuikDisc 12 inch neutral grey White Balancing tool with you
wherever you do professional photography.
Obtaining an accurate white balance for SLR/DSLR cameras
Perform a white balance in accordance with your particular camera using the
following steps:
1. Remove the QuikDisc from the zippered carry bag (Figure 1).
First, prepare your camera to do a custom white balance as indicated by the
specic instructions to your camera.
Hold the QuikDisc under the same light in the same location as your subject,
making sure that the surface of the QuikDisc is getting as evenly lit as
possible. (Note: You should be using the neutral grey side of the QuikDisc.)
There is a black logo target; this will allow your auto-focus lens to properly
focus (Figure 2).
2. Take the white balance measurement, per your camera instructions.
Successive photographs will be rendered with that white balance. Also, you
can follow your camera instructions for saving a custom white balance
measurement for re-use at a later time under the same lighting conditions.
Note: If you prefer using white, simply turn your QuikDisc over (Figure 3 and
Figure 4).
Obtaining an accurate exposure for SLR/DSLR cameras
Accurate exposure readings are often difcult using the cameras internal metering
system, but the QuikDisc makes consistent results a snap.
1. Place the QuikDisc close to the subject so you can take a direct meter
reading from its surface (as shown in the Figure 2).
2. Select a center weighted or spot-metering mode on the camera lling the
frame with the QuikDisc. Manual mode is recommended for adjusting your
aperture and/or shutter speed to gain the correct exposure off the QuikDisc.
* The above steps involving your still camera functions may differ slightly
for different models; it's important to consult your user manual for correct
procedures.
Figure 1
Figure 2
Figure 3 Figure 4
Obtaining an accurate white balance for Video
Note: Make sure you have a camera with white balance capability.
1. Remove your QuikDisc from the zippered carry bag (Figure 1).
2. Point your camera to the white side of the QuikDisc. Make sure that most
of what you are seeing is white — approximately 50-80% of frame width.
(some manufacturers recommendations may vary)
3. Set your exposure and focus.
4. Activate the white balance by pressing the button or throwing the switch.
* The above steps involving your video camera may differ slightly for
different models; it's important to consult your user manual for
correct procedures.
Customer Support (800) 486-2674
Corporate Office (831) 786-1370 • FAX (831) 786-1371
97 Hangar Way, Watsonville, CA 95076
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern