Photoflex FV-XTXS222KIT Extra Small LiteDome Basic Kit Bedienungsanleitung PDF herunterladen

Visit photoexlightingschool.com® for the best free learning resource!

For detailed specifications, product tutorial videos and more, please visit www.photoflex

.com

PROFESSIONAL PHOTOGEAR

ExtraSmall LiteDome

Basic Kit Instruction Manual • Item #: FV-XTXS222KIT

Extra Small LiteDome

Basic Kit

Before assembling your Extra Small LiteDome

, make sure all

components are present. You will need:

• Extra Small LiteDome

Softbox (A)

• BasicConnector (B)

• Adjustable ShoeMount Hardware (C)

• ShoeMount MultiClamp (D)

Attach Adjustable ShoeMount to the BasicConnector

1. Use the smaller threaded end (1/4”-20) of the reversible

stud to attach the ShoeMount hardware to the brass

threaded hole in the BasicConnector (Fig. 1). There

is a guide pin at the top of the bracket which lines up with

the untapped holes adjacent to the brass threaded hole

for added stability (the guide pin is removable for use with

other connectors that don’t have guide holes).

2. A screwdriver can be inserted into the pass hole in the

stud to assist in tightening the ShoeMount hardware.

A wrench can also be used on the at surfaces of the stud.

The ShoeMount hardware should extend out from the side

(Fig. 2).

Attach LiteDome SoftBox to the BasicConnector

3. The softbox includes four rods. The rods should already

be inserted into the interior sleeves of the softbox (Fig. 3).

We recommend leaving the rods in the sleeves during

storage. It is normal for them to develop a slight bend

where they attach to the BasicConnector.

4. Each of the rods will t in a corner hole of the basic

Connector (Fig. 4). Be sure each rod seats all the way

into its connector hole. Start with any hole, then connect

the rod directly opposite the starting rod (Fig. 5). Then

insert the rest of the rods (Fig. 6).

5. After all rods are inserted, with the softbox on the floor,

push down at each corner point to be sure each rod is

all the way into its connection hole (Fig. 7). Tip: For

disassembly, use this same technique of pushing down on

the rod corner to make it easier to remove the rod.

6. The aps of the softbox near the connector ring can be

connected at the corners using the Velcro

sewn into the

aps (Fig. 8).

7. The softbox can be changed to a vertical or horizontal

position on the connector ring by removing the rods from

the connector & reassembling after a 90 degree rotation.

Figure 1.

Figure 4.

Figure 2.

Figure 3.

Figure 5.

Figure 6.

Rev 9/25/2013

A B

Stud

Figure 8.

Figure 7.

1 2 3

Inhaltsverzeichnis

Seite 1 - Basic Kit

Visit photoexlightingschool.com® for the best free learning resource!For detailed specifications, product tutorial videos and more, please visit www.

Seite 2

Visit photoexlightingschool.com® for the best free learning resource!For detailed specifications, product tutorial videos and more, please visit www.

Seite 3 - WARRANTY

Visit photoexlightingschool.com® for the best free learning resource!For detailed specifications, product tutorial videos and more, please visit www.

Kommentare zu diesen Handbüchern

Keine Kommentare

Photoflex FV-XTXS222KIT Extra Small LiteDome Basic Kit Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Fotozubehör Photoflex FV-XTXS222KIT Extra Small LiteDome Basic Kit herunter. Photoflex FV-XTXS222KIT Extra Small LiteDome Basic Kit User Manual [ru] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fotozubehör Photoflex FV-XTXS222KIT Extra Small LiteDome Basic Kit